Cisco Cisco Aironet 340 Ethernet Bridges 用户指南
Using Filters 11 - 13
If you type llc:
a.
When you select llc, the following prompt appears:
Enter a value in hex of ffffh or less :
b.
Type a 16 bit value for the DSAP/SSAP combination (with the
DSAP being in the high 8 bits) and press ENTER.
DSAP being in the high 8 bits) and press ENTER.
Enter one of [a OUI value in hex of ffffffh or
less, any] :
This is used to specify an OUI value to further refine the
protocol identification.
protocol identification.
If you enter “a OUI value in hex of ffffffh or less”, it must match
the protocol field in addition to the SAP value.
the protocol field in addition to the SAP value.
If you enter “any”, the protocol values are not checked and the
protocol is defined only by the SAP values.
protocol is defined only by the SAP values.
c.
Type the applicable OUI value or “any” and press ENTER. If
you typed an OUI value, the following appears:
you typed an OUI value, the following appears:
Enter one of [a LLC protocol value in hex of ffffh
or less, any] :
This is used to specify a LLC protocol identifier.
If you enter “a LLC protocol value in hex of ffffh or less”, it
must match the protocol field in addition to the SAP and OUI
values.
must match the protocol field in addition to the SAP and OUI
values.
If you enter “any”, the protocol values are not checked and the
protocol is defined only by the SAP and OUI values.
protocol is defined only by the SAP and OUI values.
d.
Type the applicable LLC protocol value or “any” and press
ENTER.
ENTER.
e.
You will be prompted for a mask description as described in the
protocol section above.
protocol section above.