Cisco Cisco TelePresence MX700 发行公告
Introduction software version TC5.1.8
Cisco TelePresence System C/EX/SX/MX Series Software Release Notes
Page 38 of 194
Camera firmware versions in TC5.1.8
Precision HD 1080p 4x S2 is only supported with the SX20. The camera will work as a third party
camera, but the C series codec software will not be able to upgrade the camera, and it is therefore not
recommended for use with C series codecs. When upgrading from TC5.1.6 and older versions, the
PrecisionHD 1080p 4X S2 will upgrade twice because of a change in the placement of the camera
software. The new firmware file used for upgrade is a7camera.pkg, whereas the old package was
nandi.pkg. Each upgrade will take approximately 8 minutes, and it is very important that the codec and
camera are not disconnected from power during the upgrades.
camera, but the C series codec software will not be able to upgrade the camera, and it is therefore not
recommended for use with C series codecs. When upgrading from TC5.1.6 and older versions, the
PrecisionHD 1080p 4X S2 will upgrade twice because of a change in the placement of the camera
software. The new firmware file used for upgrade is a7camera.pkg, whereas the old package was
nandi.pkg. Each upgrade will take approximately 8 minutes, and it is very important that the codec and
camera are not disconnected from power during the upgrades.
Camera type
Hardware
ID
ID
Firmware
First
released in
released in
PrecisionHD 1080p 4x
52000000
S01752-2.0 FINAL
ID:20012
Sangam.pkg
ID:20012
Sangam.pkg
TC 5.1.5
PrecisionHD 1080p 4X S2
53000000
S01777-2-0 FINAL
ID:20012
A7camera.pkg
ID:20012
A7camera.pkg
TC5.1.8/TC6.0.1
PrecisionHD 1080p 12X
50000002/
50000003
50000003
S01718-4.0 FINAL
ID:40083
Rover.pkg
ID:40083
Rover.pkg
TC5.1.6