Cisco Cisco Aironet 1240 AG Access Point 数据表
Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 6
Item
Specification
Antenna connectors
●
2.4 GHz
●
Dual RP-TNC connectors
Status LEDs
●
Status LED indicates operating state, association status, error or warning condition, boot
sequence, and maintenance status.
●
Ethernet LED indicates status of activity over the Ethernet.
●
Radio LED indicates status of activity over the radio.
Dimensions (H x W x D)
1.1 x 6.6 x 8.5 in. (2.79 x 16.76 x 21.59 cm)
Weight
2.0 lb (0.9 kg)
Environmental
●
Nonoperating (storage) temperature: –40 to 185°F (–4 0 to 85°C)
●
Operating temperature: –4 to 131°F (–20 to 55°C)
●
Operating humidity: 10 to 90 percent (noncondensing)
System memory
●
32 MB RAM
●
16 MB flash memory
Input power requirements
●
100 to 240 VAC; 50 to 60 Hz (power supply)
●
36 to 57 VDC (device)
Powering options
●
Local power
●
802.3 AF switches
●
Cisco higher-power switches capable of supporting 13W or greater
●
Cisco Aironet power injectors (PWRINJ3 and PWRINJ-FIB)
●
Third-party PoE devices (must meet input power and power draw requirements)
Power draw
●
12.95W maximum
Note: 12.95W is the maximum power required at the powered device. If the access point is
being used in a PoE configuration, the power drawn from the power sourcing equipment will
be higher by some amount dependent on the length of the interconnecting cable. This
additional power can be as high as 2.45W, bringing the total system power draw (access
point and cabling) to 15.4W.
being used in a PoE configuration, the power drawn from the power sourcing equipment will
be higher by some amount dependent on the length of the interconnecting cable. This
additional power can be as high as 2.45W, bringing the total system power draw (access
point and cabling) to 15.4W.
Warranty
1 Year
Wi-Fi certification
System Requirements
Table 3 lists the system requirements for Cisco Aironet 1240G Series Access Points.
Table 3.
System Requirements for Cisco Aironet 1240G Series Access Points
Access Method
Description
Browser
Using the Web browser management GUI requires a computer running Internet Explorer Version 6.0 or later, or
Netscape Navigator Version 7.0 or later.
Netscape Navigator Version 7.0 or later.
PoE
Power sourcing equipment is compliant with Cisco Inline Power or IEEE 802.3af, and provides at least 12.94W at 48
VDC.
VDC.