Cisco Cisco Aironet 1600i Access Point 技术参考

This bracket will fit the AP 1040, 1140, 1260, 1600, 2600, 3500 and 3600 Series Access Points.

When wall mounting is desired, the installer should understand that walls can be a physical obstacle to 
the wireless signal; therefore, maintaining 360 degree coverage may be compromised by the wall.  If the 
wall is an outside wall and/or the goal is to send the signal in a 180-degree pattern instead, a directional 
antenna often referred to as a “patch” antenna may be a better choice assuming the AP 3600e is used.

Avoid wall-mounting APs with internal antennas such as the AP 3600i unless you use the optional 
Oberon right-angle mount (

). The internal antenna model was designed to mount to a ceiling 

to provide 360-degree coverage.  If wall-mounted in a non-ceiling orientation the signal may penetrate 
the floor above and below causing unintended coverage that could result in additional, needless roaming 
access when a mobility client, e.g., user with Wi-Fi phone, walks by on an adjacent floor.

Instead, use the AP 3600e (with dipoles or patch antennas), or use an optional wall mount that puts the 
AP 3600i or AP 3500e into a ceiling type orientation when mounted to a wall.

APs with internal antennas such as the AP 3600i that are wall-mounted should use the Oberon mounting 
bracket unless roaming is not an issue, e.g., hotspot, kiosk, or small venue scenario.