Cisco Cisco Aironet 1200 Access Point 安装指南
13
b. Grasp the card only by its edges, being careful not to touch
components on the board or the gold connector pins.
c. Remove the card from the mini-PCI connector.
3.
Place the card into an anti-static bag.
Installing a 2.4-GHz Radio Card
Follow these steps to install a 2.4-GHz radio card in the access point.
Caution
The internal access point components and the 2.4-GHz radio
can be damaged by ESD from improper handling.
can be damaged by ESD from improper handling.
1.
Carefully remove the 2.4-GHz radio card from its anti-static bag.
2.
Grasp the radio card only by its edges, being careful not to touch
components on the board or the gold connector pins.
components on the board or the gold connector pins.
3.
Connect the black wire’s antenna connector to the radio card antenna
connector marked by the black label.
connector marked by the black label.
4.
Connect the white wire’s antenna connector to the radio card antenna
connector marked by the white label.
connector marked by the white label.