Cisco Cisco SG500-52PP 52-port Gigabit Max PoE+ Stackable Managed Switch 技术参考
Smartport Commands
1024
OL-31486-02 Command Line Interface Reference Guide
53
switchxxxxxx(config)#
interface gi1/1/1
switchxxxxxx(config-if)#
smartport switchport trunk native vlan 1
53.17 smartport storm-control broadcast
enable
Use the smartport storm-control broadcast enable Interface Configuration
(Ethernet, port-channel) mode command to enable storm control on a Smartport
port. Use the no form of this command to disable storm control..
(Ethernet, port-channel) mode command to enable storm control on a Smartport
port. Use the no form of this command to disable storm control..
Syntax
smartport storm-control broadcast enable
Parameters
This command has no arguments or keywords.
Default Configuration
None
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
switchxxxxxx(config)#
interface gi1/1/1
switchxxxxxx(config-if)#
smartport storm-control broadcast enable
53.18 smartport storm-control broadcast level
Use the smartport storm-control broadcast level Interface Configuration (Ethernet,
port-channel) mode command to control the amount of Broadcast traffic allowed
on an interface.
port-channel) mode command to control the amount of Broadcast traffic allowed
on an interface.
Syntax
smartport storm-control broadcast level {
level
| kbps
kbps
}