Cisco Cisco SG500-52PP 52-port Gigabit Max PoE+ Stackable Managed Switch 技术参考
Spanning-Tree Commands
OL-31486-02 Command Line Interface Reference Guide
1045
54
Forwarding state. Use the no form of this command to restore the default
configuration.
configuration.
Syntax
spanning-tree mst
instance-id
cost
cost
no spanning-tree mst
instance-id
cost
Default Configuration
N/A
Parameters
•
instance-id—Specifies the spanning-tree instance ID. (Range: 1–15)
•
cost—Specifies the port path cost. (Range: 1–200000000)
Default Configuration
Default path cost is determined by the port speed and path cost method (long or
short) as shown below:
short) as shown below:
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example configures the MSTP instance 1 path cost for port
gi1/1/
9
to 4.
switchxxxxxx(config)#
interface
gi1/1/
9
switchxxxxxx(config-if)#
spanning-tree mst
1
cost
4
Interface
Long
Short
Port-channel
20,000
4
Gigabit Ethernet (1000 Mbps)
20,000
4
Ethernet (10 Mbps)
2,000,000
100