Cisco Cisco SG500-52PP 52-port Gigabit Max PoE+ Stackable Managed Switch 技术参考
Link Layer Discovery Protocol (LLDP) Commands
OL-31486-02 Command Line Interface Reference Guide
761
35
35.24 show lldp local
To display the LLDP information that is advertised from a specific port, use the
show lldp local Privileged EXEC mode command.
show lldp local Privileged EXEC mode command.
Syntax
show lldp local
interface-id
Parameters
Interface-id—(Optional) Specifies a port ID.
Default Configuration
If no port ID is entered, the command displays information for all ports.
Command Mode
Privileged EXEC mode
Tx delay
The delay between successive LLDP frame
transmissions initiated by value/status changes in the
LLDP local systems MIB.
transmissions initiated by value/status changes in the
LLDP local systems MIB.
Port
The port number.
State
The port’s LLDP state.
Optional TLVs
Optional TLVs that are advertised. Possible values are:
PD - Port description
SN - System name
SD - System description
SC - System capabilities
Address
The management address that is advertised.
Notifications
Indicates whether LLDP notifications are enabled or
disabled.
disabled.
PVID
Port VLAN ID advertised.
PPVID
Protocol Port VLAN ID advertised.
Protocols
Protocols advertised.
Field
Description