Cisco Cisco SG500-52PP 52-port Gigabit Max PoE+ Stackable Managed Switch 技术参考
802.1X Commands
78
OL-31486-02 Command Line Interface Reference Guide
2
Parameters
•
802.1x—Enables traps for 802.1X-based authentication.
•
mac—Enables traps for MAC-based authentication.
•
web—Enables traps for WEB-based authentication.
Default Configuration
Success traps are disabled.
Command Mode
Global Configuration mode
User Guidelines
Any combination of the keywords are allowed. At least one keyword must be
configured.
configured.
A rate limit is applied to the traps: not more than one trap of this type can be sent in 10
seconds.
seconds.
Example
The following example enables sending traps when a MAC address is successfully
authorized
by the 802.1X MAC-authentication access control.
switchxxxxxx(config)#
dot1x traps authentication success mac
2.29 dot1x unlock client
Use the dot1x unlock client Privileged EXEC mode command to unlock a locked (in
the quiet period) client.
the quiet period) client.
Syntax
dot1x unlock client
interface-id mac-address
Parameters
•
interface-id
—Interface ID where the client is connected to.
•
mac-address
—Client MAC address.