Cisco Cisco Packet Data Gateway (PDG) 故障排查指南
Gs Service Configuration Mode Commands
timeout ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
Default: 4
Specifies the retransmission timer value to guard the implicit IMSI detach from the GPRS service procedure.
Specifies the retransmission timer value to guard the implicit IMSI detach from the GPRS service procedure.
is the waiting duration in seconds before retransmitting the specific message and must be an
integer from 1 through 30.
Default: 54 minutes (plus 8 seconds for transmission delay)
Specifies the retransmission timer value to control the resetting of SGSN-Reset variable procedure.
Specifies the retransmission timer value to control the resetting of SGSN-Reset variable procedure.
is the waiting duration in minutes before retransmitting reset message for the SGSN Reset
variable and must be an integer from 0 through 380.
Default: 4
Specifies the retransmission timer value to guard the SGSN reset procedure.
Specifies the retransmission timer value to guard the SGSN reset procedure.
is the waiting duration in seconds before retransmitting the specific message and must be an
integer from 1 through 30.
Usage
Use this command to configure the time, for different procedure timers, to wait before retransmitting a
procedure message.
This command can be repeated for each timer to configure multiple timers.
procedure message.
This command can be repeated for each timer to configure multiple timers.
Example
Following command sets the timeout duration of 4 seconds for t8 timer to wait before retransmitting the procedure
message to explicitly do the IMSI detach from GPRS service:
Following command sets the timeout duration of 4 seconds for t8 timer to wait before retransmitting the procedure
message to explicitly do the IMSI detach from GPRS service: