Cisco Cisco Packet Data Gateway (PDG) 故障排查指南
Policy Control Configuration Mode Commands
▀ diameter host-select row-precedence
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
Removes the row with the specified precedence from the specified MSISDN prefix range table.
Use this command to configure the MSISDN prefix range based PCRF selection mechanism for Rel. 7 Gx
interface support, wherein the PCEF is required to discover and select an appropriate PCRF to establish
control relationship at primary PDP context activation.
This command adds a row in the specified MSISDN prefix range table. A maximum of 128 rows can be
added per prefix range table.
interface support, wherein the PCEF is required to discover and select an appropriate PCRF to establish
control relationship at primary PDP context activation.
This command adds a row in the specified MSISDN prefix range table. A maximum of 128 rows can be
added per prefix range table.
: Specifies precedence of the row in the table.
Important:
In StarOS 8.1 and later,
must be an integer from 1 through 128. In StarOS
8.0 and earlier,
must be an integer from 1 through 100.
: Specifies the MSISDN prefix range table to add the primary and/or
secondary Diameter host addresses.
: For a range of MSISDNs, specifies the starting
MSISDN.
: For a range of MSISDNs, specifies the ending MSISDN.
Important:
To enable the Gx interface to connect to a specific PCRF for a range of MSISDNs/subscribers
configure
and
with the starting and ending MSISDNs respectively.
The MSISDN ranges must not overlap between rows. To enable the Gx interface to connect to a specific PCRF for a
specific MSISDN/subscriber, configure both
specific MSISDN/subscriber, configure both
and
with the same
MSISDN.
: Specifies the primary host name.
must be an alpha and/or numeric string
of 1 through 127 characters in length.
: Specifies the primary realm ID.
must be an alpha and/or numeric string of 1
through 127 characters in length.
: Specifies the secondary host name
and realm ID:
: Specifies the secondary host name.
must be an
alpha and/or numeric string of 1 through 127 characters in length.
: Specifies the secondary realm ID.
must be an alpha and/or
numeric string of 1 through 127 characters in length.
: Specifies the algorithm for selection between
primary and secondary servers in the MSISDN prefix range table.
Default:
Default:
: Specifies selection of servers in the Active-Standby fashion.
: Specifies selection of servers in the Round-Robin fashion.
Important:
The Round Robin algorithm for PCRF selection is effective only over a large number of PCRF
selections, and not at a granular level.