Cisco Cisco Packet Data Interworking Function (PDIF) 故障排查指南
Rulebase Configuration Mode Commands
▀ egcdr threshold
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
egcdr threshold
This command sets the eG-CDR volume or interval values to generate the interim eG-CDRs and write them to eG-CDR
file.
file.
Product
GGSN, ECS
Privilege
Security Administrator, Administrator
Syntax
Removes previously configured eG-CDR threshold.
Disables the egcdr threshold settings.
Specifies the time interval (in seconds) for closing the eG-CDR if the minimum time duration thresholds are
satisfied. This option is disabled by default.
interval must be an integer from 60 to 40000000.
satisfied. This option is disabled by default.
interval must be an integer from 60 to 40000000.
: This option enables the eG-CDR generation at the fixed time
interval irrespective of any other eG-CDR triggers that may have happened in between.
Specifies the uplink/downlink volume octet counts for the generation of the interim eG-CDRs.
- Sets the limit for the number of octets downlink after which the eG-CDR is
closed.
(in bytes) must be an integer from 100,000 through 4,000,000,000. Default is
4,000,000,000.
- Sets the limit for the total number of octets (uplink+downlink) after which the eG-
CDR is closed.
(in bytes) must be an integer from 100,000 through 4,000,000,000. This
configuration is disabled by default.
- Sets the limit for the number of octets uplink after which the eG-CDR is closed.
( in bytes) must be an integer from 100,000 through 4,000,000,000. Default is
4,000,000,000.
Usage
Use this command to specify an eG-CDR threshold to generate it and write it to eG-CDR file.