Cisco Cisco Packet Data Gateway (PDG) 故障排查指南
ATM Port Configuration Mode Commands
▀ line-timing
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
line-timing
This command enables the SPIO to recover transmit timing source via the line attached to the selected port. By default,
line-timing is not enabled.
line-timing is not enabled.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Disables line-timing as the source for the transmit clock.
Usage
The port must be enabled (
) to enable recovery of timing source via the line. As well, the
card‘s slot number must be entered in the
command in the BITS port configuration mode.
Example
Disable configured line-timing as the clock source for this port.
Disable configured line-timing as the clock source for this port.