Cisco Cisco Packet Data Gateway (PDG) 故障排查指南
Context Configuration Mode Commands
▀ radius accounting server
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
(for example, if the interface is down), then the message is sent as soon as possible. Once the Accounting-On
message is sent, if it is not responded to after the configured RADIUS accounting timeout, the message is
retried the configured number of RADIUS accounting retries. Once all retries have been exhausted, the
system no longer attempts to send the Accounting-On message for this server.
message is sent, if it is not responded to after the configured RADIUS accounting timeout, the message is
retried the configured number of RADIUS accounting retries. Once all retries have been exhausted, the
system no longer attempts to send the Accounting-On message for this server.
Default:
Disables and enables the sending of the Accounting-Off message when a RADIUS server is removed from
the configuration.
The Accounting-Off message is sent when a RADIUS server is removed from the configuration, or when
there is an orderly shutdown. However, if for some reason the Accounting-On message cannot be sent at this
time, it is never sent. The Accounting-Off message is sent only once, regardless of how many accounting
retries are enabled.
the configuration.
The Accounting-Off message is sent when a RADIUS server is removed from the configuration, or when
there is an orderly shutdown. However, if for some reason the Accounting-On message cannot be sent at this
time, it is never sent. The Accounting-Off message is sent only once, regardless of how many accounting
retries are enabled.
Default: 0
Specifies the maximum number of outstanding messages that may be allowed to the server.
Specifies the maximum number of outstanding messages that may be allowed to the server.
must be an
integer from 1 through 256.
Sets the UDP communication port to the out of date standardized default for RADIUS communications to
1646.
1646.
Default: 1813
Specifies the port number to use for communications.
Specifies the port number to use for communications.
must be an integer from 0 through
65535.
Default: 1000
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
must be an integer from 1 through 1000,
where 1 is the highest priority. When configuring two or more servers with the same priority you will be
asked to confirm that you want to do this. If you use the
asked to confirm that you want to do this. If you use the
option, you are not asked for
confirmation and multiple servers could be assigned the same priority.
Default:
: Obsolete keyword.
Specifies the type of AAA transactions to use to communicate with this RADIUS server.
: Use standard AAA transactions.
Enables or disables the RADIUS authentication/accounting/ charging server functionality, and saves the
status setting in the configuration file to re-establish the set status at reboot.
status setting in the configuration file to re-establish the set status at reboot.
Indicates that the command is to execute without any additional prompt and confirmation from the user.