Cisco Cisco Tunnel Terminating Gateway (TTG) 故障排查指南
VLAN Configuration Mode Commands
vlan-map ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
vlan-map
This command sets a single next-hop IP address so that multiple vlans can use a single next-hop gateway.
is
associated with a specific interface.
Product
PDSN, HA, SGSN
Privilege
Security Administrator, Administrator
Syntax
This keyword defines an IP address for the next-hop gateway.
Can be either an IPv4 or IPv6 address in standard format.
Usage
Use vlan-map to combine multiple vlan links to go through a single IP address. This feature is used in
conjunction with nexthop forwarding and overlapping IP pools.
After configuring the vlan-map, move to the Port Ethernet configuration mode to attach the vlan-map to a
specific vlan.
conjunction with nexthop forwarding and overlapping IP pools.
After configuring the vlan-map, move to the Port Ethernet configuration mode to attach the vlan-map to a
specific vlan.
Example
The following command sets an IPv4 for a next-hop gateway.
The following command sets an IPv4 for a next-hop gateway.