Cisco Cisco Packet Data Gateway (PDG) 维护手册
Configuration Management
Generally Available 06-30-2010
3-150
paging-policy
The command name has changed from paging-scheme to paging policy but it still
configures the paging parameters for the GPRS service. Keywords (parameters) have been
modified and combined to enhance efficiency:
configures the paging parameters for the GPRS service. Keywords (parameters) have been
modified and combined to enhance efficiency:
CLI (GPRS Service Configuration Mode)
paging-policy { last-known-area { all | bsc | cell | location-area |
routing-area } | max-retransmissions retran_num }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
paging-policy
With the addition of the zero (‘0’) to the value range for the
max-retransmissions
keyword,
it is now possible to disable retransmissions for paging policy so only a single 2G
PS-paging request will be sent to the BSC.
CLI (GPRS Service Configuration Mode)
paging-policy { last-known-area { all | bsc | cell | location-area |
routing-area } | max-retransmissions < 0 to 5 >}
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
partial-apn-match
New keyword (
partial-apn-match
) has been added to the
sm
command to optimize radio
resource usage by managing signaling between the MS and the SGSN. Specifically, this
keyword enables partial matching of a requested APN during APN selection.
keyword enables partial matching of a requested APN during APN selection.
CLI (GPRS Service Configuration Mode)
sm { activate-max-retransmissions num_retries | deactivate-max-
retransmissions num_retries | ignore-pco-decode-error |
modify-max-retransmissions num_retries | partial-apn-match |
requested-apn-from-first-subrec | t3385-timeout secs | t3386-timeout secs |
t3395-timeout secs | trim-trailing-spaces-in-apn }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
peer-nsei
This command was the nsei command in the GPRS service configuration mode. The
command now has a new name.
command now has a new name.
This command has a new keyword -
pooled
- which enables
pooling with non-pooled BSCs
within the pool area
.
CLI (GPRS Service Configuration Mode)
peer-nsei nse_id { lac lac_id rac rac_id | pooled }
[ no ] peer-nsei nse_id { lac lac_id rac rac_id | pooled }