Cisco Cisco Nexus 5010 Switch 安装指南
21
Cisco Nexus 5500 Series NX-OS Software Upgrade and Downgrade Guide, Release 7.0(8)N1(1)
In-Service Software Upgrades
Verifying image bootflash:/n5000-uk9-kickstart.7.0.8.N1.1.bin for boot variable
"kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/n5000-uk9.7.0.8.N1.1.bin for boot variable "system".
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/n5000-uk9.7.0.8.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/n5000-uk9-kickstart.7.0.8.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/n5000-uk9.7.0.8.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting "fexth" version from image bootflash:/n5000-uk9.7.0.8.N1.1.bin.
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive reset
2 yes non-disruptive rolling
3 yes non-disruptive rolling
126 yes non-disruptive none
127 yes non-disruptive none
133 yes non-disruptive rolling
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------------- ---------------------- ---------------------- ------------
1 system 6.0(2)N1(2) 7.0(8)N1(1)
no
1 kickstart 6.0(2)N1(2) 7.0(8)N1(1)
1 bios v3.6.0(05/09/2012) v3.6.0(05/09/2012) no
1 power-seq v2.0 v2.0 no
1 SFP-uC v1.0.0.0 v1.0.0.0 no
2 power-seq v1.0 v1.0 no
3 power-seq v2.0 v2.0 no
126 fexth 7.0(0)N1(1) 7.0(8)N1(1) yes
127 fexth 7.0(0)N1(1) 7.0(8)N1(1)
yes
133 fexth 6.0(2)N1(2) 7.0(8)N1(1) yes
1 microcontroller v1.2.0.1 v1.2.0.1 no
switch-1#
•
Check whether disable-fka is set on any of the FCoE NPV (VNP) ports as a pre-ISSU check as
follows:
follows:
switch# show fcoe-npv issu-impact
show fcoe-npv issu-impact