Cisco Cisco Aironet 1310 Access Point Bridge 發佈版本通知
16
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(11)JA1
OL-12426-01
Troubleshooting
•
CSCse70031—Access points running Cisco IOS Release 12.3(8)JA2 and configured for WPAv2 no
longer sends its MAC address as the username in the ACS accounting records.
longer sends its MAC address as the username in the ACS accounting records.
•
CSCsg48579— The no led display alternate command has been removed from the access point’s
running configuration.
running configuration.
•
CSCse29487—Repeater-to-repeater roaming now occurs correctly.
•
CSCsg05807—7920 phones roam correctly between MBSSID-enabled access points.
•
CSCsg26708—Access points running Cisco IOS Release 12.3(8)JA2 no longer stop passing
broadcast traffic from the wired to wireless side.
broadcast traffic from the wired to wireless side.
•
CSCsg79644—1240 and 1230 access points in workgroup bridge and associated to a 1300 series
bridge no longer stop broadcast and multicast traffic.
bridge no longer stop broadcast and multicast traffic.
•
CSCsd62772—Radius accounting start/stop records are not sent, for associated client
•
CSCse84920—Access point no longer reloads with unknown system cause.
•
CSCse95836—Access point no longer forwards invalid ethernet frame, length=0 over wireless link.
•
CSCsf08775—EAP-FAST supplicant now authenticates correctly to a Steel Belt RADIUS server
•
CSCsg16033—A workgroup bridge associated to a root access point now appear when polling the
Dot11 Client Configuration Info Table and Dot11 Client Statistics Table of the
CISCO-DOT11-ASSOCIATION-MIB.
Dot11 Client Configuration Info Table and Dot11 Client Statistics Table of the
CISCO-DOT11-ASSOCIATION-MIB.
•
CSCsg20744—Disable MBSSID message now appears when configuring the access point in
scanner mode.
scanner mode.
•
CSCse72925—SNMP mib community-map command no longer causes a traceback and access
point reload.
point reload.
•
CSCsf95975—Access points no longer crash when AeroScout server address is misconfigured.
•
CSCsg44483—LEAPCL-3-TIMEOUT messages no longer appear on reauthentication/rekey.
•
CSCsg73790—Wired clients on a workgroup bridge now receive multicast traffic from an LWAPP
access point.
access point.
•
CSCsg99358—1240 series no longer crashes in unconfigured VLAN on automated regression.
If You Need More Information
If you need information about a specific caveat that does not appear in these release notes, you can use
the Cisco Bug Toolkit to find select caveats of any severity. Click this URL to browse to the Bug Toolkit:
the Cisco Bug Toolkit to find select caveats of any severity. Click this URL to browse to the Bug Toolkit:
(If you request a defect that cannot be displayed, the defect number might not exist, the defect might not
yet have a customer-visible description, or the defect might be marked Cisco Confidential.)
yet have a customer-visible description, or the defect might be marked Cisco Confidential.)
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
. Click Technology Support, choose Wireless
from the menu on the left, and click Wireless LAN.