Cisco Cisco Aironet 1400 Wireless Bridge 安装指南

To mount the bridge on a tower, follow these steps:

Choose a mounting location on the tower for the bridge. If you are using the integrated antenna, the 
mounting location must provide a clear signal path to the remote bridge. For more information, see 

.

Find a suitable mounting support or install a mounting pole for the bridge. The mounting bracket 
accommodates poles from 1.25 to 4.5 inches (30.5 to 115 mm) in diameter; the supplied U bolts fit 1.25 
to 1.75-inch poles only. You can find this type of hardware at http://www.tesco.com and 
http://www.rohnnet.com.

Hoist the bridge assembly to the mounting location. The mounting brackets include hoist rings that can 
simplify this task. If you are hoisting a bridge that uses an external antenna, leave the foam block 
attached to the face of the bridge while hoisting to protect the N connector.

Attach the bridge to the mounting pole using appropriate hardware. For more information, see the 

, 

mounting bracket accommodates either a large mounting pole (see 

) or small one (see 

).

The integrated antenna is polarized, so be sure to attach the bridge housing brackets so that the 
antenna polarization matches the remote antenna polarization.