Cisco Cisco Aironet 1310 Access Point Bridge 發佈版本通知
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
17
Release Notes for Cisco Aironet 1310 Outdoor Access Point/Bridge for Cisco IOS Release 12.3(2)JA
OL-6723-01
Caveats
•
CSCee14599—Access points in standby mode no longer allow client associations when the Ethernet
port is disabled.
port is disabled.
•
CSCee18627—Access point no longer reboots when clear radius local-server user command is
issued.
issued.
•
CSCee20478—Console no longer freezes when changing between static IP and DHCP.
•
CSCee24611—After several days of connectivity, access points no longer fail to communicate with
workgroup bridges that are LEAP authenticated.
workgroup bridges that are LEAP authenticated.
•
CSCee26301—SSH now operates correctly when you change the access point host name.
•
CSCee29096—Access point error messages now comply with ISO standards.
•
CSCee29948—The access point now correctly assigns the ntp broadcast client command to the
bvi1 interface.
bvi1 interface.
•
CSCee30632—Access points now support SNTP.
•
CSCee30896—Access points configured as local authenticators no longer unnecessarily
authenticate clients twice.
authenticate clients twice.
•
CSCee32246—The rts retries command now works as expected.
•
CSCee35686—When you set an 802.11g-only data rate to required on the access point 802.11g
radio, the access point GUI now displays a reminder that the setting prevents associations from
802.11b client radios.
radio, the access point GUI now displays a reminder that the setting prevents associations from
802.11b client radios.
•
CSCee34600—BR1310 WMIC now sends a blank SSID when guest mode is disabled for all SSIDs.
•
CSCee38517—The access point now sends an EAP-FAILURE message to a client device that fails
authentication when the ACS server sends an ACCESS-REJECT message.
authentication when the ACS server sends an ACCESS-REJECT message.
•
CSCee39180—The default link to online help files is now automatically updated when you upgrade
the access point software.
the access point software.
•
CSCee39809—Access points configured for LEAP no longer randomly reboot.
•
CSCee44666—Software upgrade no longer disables TACACS+.
•
CSCee45192—You can now enable both debugging notifications and Syslog messages on the access
point GUI.
point GUI.
•
CSCee50581—SSIDs that contain spaces are no longer truncated in the Adjacent Nodes list on the
Network Map page on the access point GUI.
Network Map page on the access point GUI.
•
CSCee51677—When you configure a time zone on the access point GUI, the access point
configuration viewed on the CLI matches the GUI setting.
configuration viewed on the CLI matches the GUI setting.
•
CSCee56830—The hot standby access point no longer shuts down the radio of the primary access
point when the standby access point radio is disabled.
point when the standby access point radio is disabled.
•
CSCee61010—The access point now requires 63 hexadecimal characters for the WPA pre-shared
key.
key.
•
CSCee62546—The access point GUI now warns users that Aironet extensions must be enabled
when you configure MIC or per-packet keying on the access point.
when you configure MIC or per-packet keying on the access point.
•
CSCee63875—The createAndWait option in the CISCO-FLASH-MIB now operates correctly on
access points.
access points.
•
CSCee64873—The password hash function of WLCCP no longer changes the resulting hash with
every execution.
every execution.