Cisco Cisco Aironet 1310 Access Point Bridge 發佈版本通知
12
Release Notes for Cisco Aironet 1300 Series Outdoor Access Point/Bridge for Cisco IOS Release 12.3(7)JA1
OL-8207-01
Caveats
Resolved Caveats in 12.3(7)JA1
•
CSCei61732—
Cisco IOS may permit arbitrary code execution after exploitation of a heap-based buffer overflow
vulnerability. Cisco has included additional integrity checks in its software, as further described
below, that are intended to reduce the likelihood of arbitrary code execution.
vulnerability. Cisco has included additional integrity checks in its software, as further described
below, that are intended to reduce the likelihood of arbitrary code execution.
Cisco has made free software available that includes the additional integrity checks for affected
customers.
customers.
This advisory is posted at
.
•
CSCej08390—Reboot loop with snmp-server ifindex persist configured no longer occurs.
•
CSCsb85705—RX byte counter per rate now increments correctly.
•
CSCsb49385—A roaming workgroup bridge no longer selects a non-optimal root access point.
•
CSCsb56012—Clients are now able to associate when WDS device is down.
•
CSCef77951—Excessive processor memory is no longer held by IRB/CRB rxtypes.
•
CSCee36192—The no snmp-server enable traps tty command is effective through reload.
•
CSCeg83274—Access point now sends RADIUS state information.
Resolved Caveats in Cisco IOS Release 12.3(7)JA
These caveats are resolved in Cisco IOS Release 12.3(7)JA for the access point/bridge:
•
CSCsb06824—Open authentication is no longer added to an EAP SSID when a non-root bridge
configuration is loaded.
configuration is loaded.
•
CSCsb12321—The access point bridge table is now correct when a workgroup bridge roams.
•
CSCeh42053—Access point/bridge no longer shows dot11radio 0 enabled.
•
CSCeb52431—When logging into a TACACS+ server, access points sometimes send hundreds of
additional authentication requests to the server after a successful authentication.
additional authentication requests to the server after a successful authentication.
•
CSCsb31323, CSCsa98906—In non-root bridge or workgroup bridge mode, the access point/bridge
no longer requires an infrastructure SSID.
no longer requires an infrastructure SSID.
•
CSCeh65538 (duplicate of CSCei09772)—Access point/bridge now accepts associations after a
traffic burst.
traffic burst.
•
CSCeh42504—When VLANs are configured and the radio interface goes down, the traceback
INTERFACE_ACE_API-3-NOADDSUBBLOCK no longer displays.
INTERFACE_ACE_API-3-NOADDSUBBLOCK no longer displays.
•
CSCei09744—The access point/bridge roams within specifications.
•
CSCei09772—The access point/bridge no longer shuts down the radio interface after roaming.
•
CSCsb26690—The access point/bridge no longer crashes when more than 20 devices are associated.
•
CSCsb14224—Reverse ARP now works on all VLANs.
•
CSCsa98961—dot11RetryCount SNMP counters now agree with the CLI.
•
CSCeh88199—Critical temperature threshold established for access point/bridge.
•
CSCeh84137—Dot11 arp cache causes the access point/bridge to reload.
Cisco has been unable to reproduce this caveat.