Cisco Cisco Identity Services Engine 1.3 产品宣传页
구축 시 PAN 자동 장애 조치 구성을 활성화한 경우, 다음 메시지가 나타납니다.
PAN Auto Failover is enabled, this operation is not
allowed! Please disable PAN Auto-failover first.
allowed! Please disable PAN Auto-failover first.
예
ise/admin(config)# interface GigabitEthernet 1
ise/admin(config-GigabitEthernet)# ip address 209.165.200.227 255.255.255.224
Changing the hostname or IP may result in undesired side effects,
such as installed application(s) being restarted.
........
To verify that ISE processes are running, use the
'show application status ise' command.
ise/admin(config-GigabitEthernet)#
ise/admin(config-GigabitEthernet)# ip address 209.165.200.227 255.255.255.224
Changing the hostname or IP may result in undesired side effects,
such as installed application(s) being restarted.
........
To verify that ISE processes are running, use the
'show application status ise' command.
ise/admin(config-GigabitEthernet)#
Cisco Identity Services Engine CLI 참조 가이드, 릴리스 1.4
193
구성 모드의 Cisco ISE CLI 명령
ip address