Cisco Cisco AP541N Wireless Access Point 维护手册

Troubleshooting Your Connection

14

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

DHCP is enabled on the Cisco AP541N by default. When a DHCP server is 
enabled on your network and the access point is connected to the network, the 
DHCP server replaces the default static IP address with a DHCP server–assigned 
IP address. If this happens before you display the Access Point Configuration 
Utility window, you must use the assigned IP address to display the utility. If this 
happens during configuration, the Access Point Configuration Utility will lose 
connectivity.

You can query the DHCP server for the new IP address or disconnect the access 
point from the network and reset the device to use the static default access point 
IP address by using the 

 procedure.

To use the 

 button to reboot or reset the access point, do the following:

•

To reboot the access point, press the 

 button. Do not hold it for more 

than 10 seconds.

•

To restore the access point to the factory default settings:

1. Disconnect the access point from the network or disable all DHCP 
servers on your network.

2. With the power on, press-and-hold the 

 button for more than 10 

seconds.