Cisco Cisco Packet Data Gateway (PDG)
ipv6 dns
Configures primary and secondary IPv6 Domain Name Service (DNS) servers.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
[
no
]
ipv6 dns
{
primary
|
secondary
} {
ipv6_dns_address
}
no
Deletes a previously configured DNS server.
primary
Configures the IPv6 address of primary DNS server for the APN.
secondary
Configures IPv6 address of the secondary DNS server for the APN. Only one secondary DNS server can be
configured.
configured.
ipv6_dns_address
The IP address of the DNS server entered using IPv6 colon-separated-hexadecimal notation.
Usage Guidelines
DNS servers are configured on a per-APN profile basis. This allows each APN profile to use specific servers
in processing PDP contexts.
in processing PDP contexts.
The DNS can be specified at the APN level in APN configuration as well as at the Context level in Context
configuration mode with ip name-servers command, or it can be received from AAA server.
configuration mode with ip name-servers command, or it can be received from AAA server.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1639
APN Configuration Mode Commands
ipv6 dns