Cisco Cisco Packet Data Interworking Function (PDIF)
clear gtpu statistics
Clears enhanced GPRS Tunneling Protocol user plane statistics and counters found in show command outputs
and bulk statistics associated with all GTP-U-related services or those defined by the parameters in this
command.
and bulk statistics associated with all GTP-U-related services or those defined by the parameters in this
command.
Product
P-GW
S-GW
MME
SAEGW
Privilege
Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
clear gtpu statistics [ gtpu-service gtpu_service_name | mseg-service mseg_service_name | peer-address
{ ipv4/ipv6_address | all] }
{ ipv4/ipv6_address | all] }
gtpu-service gtpu_service_name
Clears GTP-U statistics for an existing GTP-U service specified as an alphanumeric string of 1 through 63
characters.
characters.
mseg-service mseg_service_name
This keyword is not supported in this release.
Important
peer-address
Clears GTP-U statistics for an existing peer IP address entered in IPv4 dotted-decimal or IPv6
colon-separated-hexadecimal notation.
colon-separated-hexadecimal notation.
Usage Guidelines
Use this command to clear running statistics and counters found in show command and bulk statistics outputs
for all GTP-U-related services or for specific services or IP addresses as specified by parameters in this
command.
for all GTP-U-related services or for specific services or IP addresses as specified by parameters in this
command.
Command Line Interface Reference, Modes E - F, StarOS Release 19
325
Exec Mode Commands (A-C)
clear gtpu statistics