Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ regional-subscription-restriction
▄ Command Line Interface Reference, StarOS Release 18
2086
20 - MAC failure
21 - Synch failure
22 - Congestion
23 - GSM authentication unacceptable
40 - No PDP context activated
48 to 63 - retry upon entry into a new cell
95 - Semantically incorrect message
96 - Invalid mandatory information
97 - Message type non-existent or not implemented
98 - Message type not compatible with state
99 - Information element non-existent or not implemented
100 - Conditional IE error
101 - Message not compatible with the protocol state
111 - Protocol error, unspecified
user-device-release { before-r99 | r99-or-later } failure-code code
Enables the SGSN to assign a reject cause code based on the detected 3GPP release version of the MS
equipment.
One of the following options must be selected and completed:
equipment.
One of the following options must be selected and completed:
before-r99
: Indicates the MS would be a 3GPP release prior to R99 and an appropriate failure code
should be defined.
failure-code code
: Enter an integer from 2 to 111. Refer to the list above.
r99-or-later
: Indicates the MS would be a 3GPP Release 99 or later and an appropriate failure code
should be defined.
failure-code code
: Enter an integer from 2 to 111. Refer to the list above.
Usage
Use this command to define GMM reject cause codes when rejection is due to regional subscription
information failure.
information failure.
Example
The following command sets a location area rejection message, code 12 for regional restriction rejections:
regional-subscription-restriction failure-code 12