Cisco Cisco ASR 5000
CSCF Service Configuration Mode Commands
▀ bind
▄ Command Line Interface Reference, StarOS Release 18
3296
Important:
The IPSec CSCF crypto template should be configured in the same context in which the P-CSCF is
configured.
max-sessions
max#
Default: 500,000
Specifies the maximum number of sessions managed by this service on this interface.
Specifies the maximum number of sessions managed by this service on this interface.
max#
must be configured to any integer value from 0 to 500,000.
Important:
The total session capacity of the system is 500,000.
max-sessions
is also limited by the capacity in
the license generated for the service. If licenses for PDSN/GGSN/HA are generated for
x
number of sessions, then the
license for the CSCF service will be generated at 500,000-
x
. Hardware configuration and installed features can also
affect the maximum number of sessions that can be supported.
port
number
Default: 5060
Specifies the UDP port number.
Specifies the UDP port number.
number
must be an integer value from 1 to 65534.
reserved-call-capacity
percentage
Default: 10
Specifies the call capacity percentage per session manager (sessmgr).
Specifies the call capacity percentage per session manager (sessmgr).
percentage
must be an integer value from 1 to 50.
tls-crypto-template template [ tls-port number ]
Specifies the name of an existing Transport Layer Security (TLS) crypto template to enable TLS
functionality. Valid only for P-CSCF or A-BG.
functionality. Valid only for P-CSCF or A-BG.
template
must be an existing TLS crypto template and be from 1 to 127 alpha and/or numeric characters.
Default: 5061
Specifies the TLS port number.
Specifies the TLS port number.
number
must be an integer value from 1 to 65534.
Important:
When the
tls-crypto-template
is configured, TCP transport must be enabled, otherwise this
command will throw an error. The configured
tls-crypto-template
should be should be configured in the same
context in which the P-CSCF service is configured and must be complete with all certificate and cipher suite
configuration. If the
configuration. If the
tls-crypto-template
is not present or not completely configured, the P-CSCF service will not
be started.
transport tcp
Enables TCP transport for the address.
use-serviceport-towards-network
Enables use of service port for sending and receiving UDP messages from network elements.