Cisco Cisco ASR 5000
IuPS Service Configuration Mode Commands
▀ plmn
▄ Command Line Interface Reference, StarOS Release 18
6870
plmn
Configures the PLMN (public land mobile network) related parameters for the IuPS service. This command is appicable
to releases 8.1 and higher.
to releases 8.1 and higher.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IuPS Service Configuration
configure > context context_name > iups-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service)#
Syntax
plmn id mcc mcc_num mnc mnc_num [ network-sharing common-plmn mcc mcc_num mnc mnc_num [
plmn-list mcc mcc_num mnc mnc_num [ mcc mcc_num mnc mnc_num+ ] ] ]
plmn-list mcc mcc_num mnc mnc_num [ mcc mcc_num mnc mnc_num+ ] ] ]
no plmn id
no
Removes the PLMN ID from the configuration.
id
Creates a PLMN configuration instance based on the PLMN ID (comprised of the MCC and MNC). In
accordance with TS 25.413, the SGSN supports up to 32 PLMN configurations for shared networks.
accordance with TS 25.413, the SGSN supports up to 32 PLMN configurations for shared networks.
mcc mcc_num
Specifies the mobile country code (MCC) portion of the PLMN’s identifier.
mcc_num:
The PLMN MCC identifier and can be configured to any integer value between 100 and 999.
mnc mnc_num
Specifies the mobile network code (MNC) portion of the PLMN’s identifier.
mnc_num:
The PLMN MNC identifier and can be configured to any 2-digit or 3-digit value between 00 and
999.
network-sharing common-plmn mcc mcc_num mnc mnc_num
When network sharing is employed, this set of keywords is required to define the PLMN Id of the common
PLMN. The common PLMN is usually not the same as the local PLMN.
PLMN. The common PLMN is usually not the same as the local PLMN.
Important:
With the release of 15.0, both 2G and 3G MOCN functionality is now license controlled and the
license is required to use all previously available network sharing SGSN configuration commands. For additional
information, contact your Cisco Account Representative.
information, contact your Cisco Account Representative.