Cisco Cisco ASR 5000
SGSN Pool Area Configuration Mode Commands
▀ lac
▄ Command Line Interface Reference, StarOS Release 18
8588
lac
This command defines a set of location area code (LAC) values for a pool area.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Gs Service Configuration > Pool Area Configuration
configure > context context_name > gs-service service_name > pool-area pool_area_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gs-pool-area)#
Syntax
lac lac_id +
no lac lac_id
no
Removes the configured LAC value from this pool area configuration.
lac
lac_id
Specifies the subscribers’ location area code (LAC) to be associated with this pool area and a specific VLR.
This LAC is obtained from the radio area identity (RAI).
This LAC is obtained from the radio area identity (RAI).
lac_id:
Must be an integer from 1 through 65535.
+
More than one
lac_id
, separated by a space, can be entered within a single command.
Usage
Use this command to specify a set of LACs to use for a pool area.
This command can be entered multiple times, subject to a limit of 32 LAC definitions (total for non-pool-
area and pool-area configuration) per Gs service.
This command can be entered multiple times, subject to a limit of 32 LAC definitions (total for non-pool-
area and pool-area configuration) per Gs service.
Important:
LAC values across multiple pool areas and non-pool-areas must be unique within the Gs service.
Example
The following command configures LACs
101, 301,
and
222
for the pool area.
lac 101 301 222