Cisco Cisco ASR 5000
SGSN PSP Configuration Mode Commands
▀ sctp-parameter
▄ Command Line Interface Reference, StarOS Release 18
8612
sctp-parameter
This command enables the SGSN administrator to alter the contents of the Optional Address Parameter IE.
Product
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Peer-Server Configuration > PSP Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type > peer-server id id
> psp instance psp_instance
> psp instance psp_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-ss7rd_id-ps-peer-server_id-psp-psp_instance)#
Syntax
[ default | no ] sctp-parameter ipv4-address suppress single-ended
[ default | no ]
Either command prefix resets the default behavior to repeat the source IP address in the IE.
Usage
In situations when the endpoint is uni-homed (that is, single transport layer address), this command enables
the SGSN administrator to override the default behavior and to configure the SGSN to suppress (not repeat)
the source IP address which is typically included as part of the Optional Address Parameter IE in the
INIT/INIT-Ack chunk.
the SGSN administrator to override the default behavior and to configure the SGSN to suppress (not repeat)
the source IP address which is typically included as part of the Optional Address Parameter IE in the
INIT/INIT-Ack chunk.
Example
Enable suppression of sending repeated IP address in the OAP IE with this command:
sctp-parameter ipv4-address suppress single-ended
Repeat sending the source IP address in the OAP IE with the following command:
no sctp-parameter ipv4-address suppress single-ended