Cisco Cisco ASR 5000
SGSN PSP Configuration Mode Commands
▀ sctp-sack-period
▄ Command Line Interface Reference, StarOS Release 18
8618
sctp-sack-period
This command sets the delay before sending an SCTP selective acknowledgement (SACK).
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Peer-Server Configuration > PSP Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type > peer-server id id
> psp instance psp_instance
> psp instance psp_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-ss7rd_id-ps-peer-server_id-psp-psp_instance)#
Syntax
sctp-sack-period [ units-10ms ] value
default sack-period
units-10ms
Including this keyword, before entering a value, enables configuration with finer granuality - in 10
millisecond units.
millisecond units.
value
If the
units-10ms
keyword is included, then set the timeout in increments of 10 milliseonds. The value must
be an integer between 0 and 50.
If the
If the
units-10ms
keyword is not included then set the timeout in increments of 100 milliseconds. The value
must be an integer between 0 and 5.
default
Resets the system to the
sctp-sack-period
default value, 2 (=200 milliseconds).
Usage
Use this command to set the time the SCTP waits to send a SACK.
Important:
Before using this command to set a value, you must disassociate the PSP instance with the
no
associate
command. When you have set the value with this command, then use the
associate
command to setup a
new association.
Example
sctp-sack-period 3