Cisco Cisco ASR 5000
AAA Server Group Configuration Mode Commands
radius attribute ▀
Command Line Interface Reference, StarOS Release 18 ▄
195
The system uses a revertive algorithm when transitioning active NAS IP addresses as described below:
If the configured primary NAS-IP-Address transitions from UP to DOWN, and the backup NAS-IP-
Address is UP, then the active NAS-IP-Address switches from the primary to the backup NAS-IP-
Address.
Address.
If the backup NAS-IP-Address is active, and the primary NAS-IP-Address transitions from DOWN to
UP, then the active NAS-IP-Address switches from the backup to the primary NAS-IP-Address.
Example
The following command configures the RADIUS identification parameter, NAS IP address to
10.2.3.4
.
radius attribute nas-ip-address 10.2.3.4