Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
ptmsi-signature-reallocate ▀
Command Line Interface Reference, StarOS Release 18 ▄
2069
ptmsi-signature-reallocate
Enables P-TMSI signature reallocation during Attach/RAU procedures.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
ptmsi-signature-reallocate { attach | frequency frequency | interval interval | ptmsi-
reallocation-command | routing-area-update [ update-type ] } [ access-type { gprs | umts
} | frequency frequency ]
reallocation-command | routing-area-update [ update-type ] } [ access-type { gprs | umts
} | frequency frequency ]
ptmsi-signature-reallocate routing-area-update [ access-type { gprs | umts } | frequency
frequency | update-type { combined-update | imsi-combined-update | periodic | ra-update }
] [ access-type { gprs | umts } | frequency frequency ]
frequency | update-type { combined-update | imsi-combined-update | periodic | ra-update }
] [ access-type { gprs | umts } | frequency frequency ]
[ no | remove ] ptmsi-signature-reallocate { attach | frequency | interval | routing-
area-update [ update-type { combined-update | imsi-combined-update | periodic | ra-update
} ] } [ access-type { gprs | umts } ]
area-update [ update-type { combined-update | imsi-combined-update | periodic | ra-update
} ] } [ access-type { gprs | umts } ]
no
Disables the authentication procedures configured for the specified P-TMSI signature reallocation
configuration in the call control profile.
configuration in the call control profile.
remove
Deletes the defined authentication procedures for the specified P-TMSI signature reallocation configuration
from the call control profile configuration file.
from the call control profile configuration file.
attach
Enables/disables P-TMSI signature reallocation for Attach with local P-TMSI.
access-type type
One of the following must be selected to reallocate on the basis of the type of network access:
gprs
umts
This keyword can be used in combination with other keywords to refine the reallocation configuration.