Cisco Cisco Packet Data Gateway (PDG)
GPRS Service Configuration Mode Commands
▀ gmm
▄ Command Line Interface Reference, StarOS Release 18
6040
13 - Roaming not allowed in this location area
14 - GPRS services not allowed in this PLMN
15 - No Suitable Cells In Location Area
16 -MSC temporarily not reachable
17 - Network failure
20 - MAC failure
21 - Synch failure
22 - Congestion
23 - GSM authentication unacceptable
40 - No PDP context activated
48 to 63 - retry upon entry into a new cell
95 - Semantically incorrect message
96 - Invalid mandatory information
97 - Message type non-existent or not implemented
98 - Message type not compatible with state
99 - Information element non-existent or not implemented
100 - Conditional IE error
101 - Message not compatible with the protocol state
111 - Protocol error, unspecified
ciph-gmm-msg-from-unknown-ms { detach | ignore }
Configures how the SGSN will behave when it receives a ciphered GMM message from an unknown MS.
detach
- Instructs the SGSN to send a Detach message to the MS.
ignore
- Instructs the SGSN to send an Ignore (drop) message to the MS.
Default:
ignore
implicit-detach-timeout secs
Specifies the implicit detach timer (IDT) value for the 2G ISR implicit detach procedure on the network side
(see ISR -- Idle Mode Signaling Reduction on the S4-SGSN feature chapter in the SGSN Administration
Guide for additional timer usage details).
The IDT is configurable from release 15.0 onwards and it is only applicable to 2G ISR activated calls. If ISR
is not activated on a 2G call then the subscriber is detached soon after expiry of the mobile reachability timer
(MNR) timer.
(see ISR -- Idle Mode Signaling Reduction on the S4-SGSN feature chapter in the SGSN Administration
Guide for additional timer usage details).
The IDT is configurable from release 15.0 onwards and it is only applicable to 2G ISR activated calls. If ISR
is not activated on a 2G call then the subscriber is detached soon after expiry of the mobile reachability timer
(MNR) timer.
secs
must be an integer from 240 to 86400 and the default value is 3600.
mobile-reachable-timeout mins
Default: 58 minutes
Specifies the timeout value for the mobile reachability timer (MNR). This timer is used with the IDT timer
described above.
Specifies the timeout value for the mobile reachability timer (MNR). This timer is used with the IDT timer
described above.
mins
must be an integer from 4 to 1440.