Cisco Cisco ASR 5700
Global Configuration Mode Commands (L-S)
▀ qci
▄ Command Line Interface Reference, StarOS Release 17
5440
precedence-class precedence-class-value
Defines Pre Release 8 value for configuring packet precedence.
precedence-class precedence-class-value
: D efines Pre Release 8 value for configuring packet
precedence as an integer from 1 through 32.
reliability-class
reliability-class-value
Defines Pre Release 8 value for configuring packet reliability.
reliability-class
reliability-class-value
: D efines Pre Release 8 value for configuring packet
reliability as an integer from 1 through 32.
downlink
Configures for downlink traffic.
802.1p-valuevalue
802.1p-valuevalue
: Configures for downlink traffic 802.1p-value as an integer from 1 through 7.
encaps-header { copy-inner | dscp-marking
dscp-marking-value
| copy-outer}
encaps-header
: Defines the DSCP value to be applied to encaps header.
copy-inner
: Copy inner DSCP to outer.
dscp-marking
dscp-marking-value
: Defines the DSCP value to be applied to packets with this QCI.
dscp-marking-value
: A Hexadecimal number between 0x0 and 0x3F.
copy-outer
Copies the DSCP value coming in an encapsulation header from the S1u interface to the
encapsulation header sent on the S5 interface and vice-versa.
gbr
Sets the type of the QCI to GBR.
max-packet-delay
max-packet-delay-value
Defines the maximum packet delay in ms for the data with the QCI as an integer from 10 through 1000.
max-error-rate
max-error-rate
Defines the maximum error rate that the data stream can handle in power of 10 as an integer from 1 through
6.
6.
non-gbr
Sets the type of the QCI to non GBR.
traffic-policing interval
value
Sets the parameters for traffic policing interval in seconds as an integer from 1 through 100.
uplink
Configures for uplink traffic.
mpls-exp-value
value
Configures for uplink traffic mpls-exp-value as an integer from 1 through 7.