Cisco Cisco ASR 5700
Global Configuration Mode Commands (T-threshold phspc)
▀ threshold npu-utilization
▄ Command Line Interface Reference, StarOS Release 17
5650
threshold npu-utilization
Configures alarm or alert thresholds for the percentage of network processing unit (NPU) utilization.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold npu-utilization high_thresh clear low_thresh
default
Configures this command with the default threshold settings.
Default: 0—disabled
Default: 0—disabled
high_thresh
Specifies the high percentage threshold for NPU utilization that must be met or exceeded within the polling
interval to generate an alert or alarm.
interval to generate an alert or alarm.
high_thresh
must be an integer from 0 through 100. A value of 0 disables the threshold.
Default: 0
clear low_thresh
Specifies the low percentage threshold for NPU utilization that must be met within the polling interval for a
clear alarm to be generated.
clear alarm to be generated.
low_thresh
must be an integer from 0 through 100. A value of 0 disables the threshold. If not set, the
high_thresh
will be the high and low threshold setting.
Default: 0
Usage
Use this command to configure the NPU utilization threshold settings.
Example
The following command sets the NPU utilization threshold settings to a high of
90
% and a low of
75
%:
threshold npu-utilization 90 clear 75