Cisco Cisco ASR 5700
Subscriber Configuration Mode Commands
▀ ims application-manager
▄ Command Line Interface Reference, StarOS Release 17
8736
ims application-manager
Specifies the IP Multimedia Subsystem (IMS) application manager for the subscriber.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ no ] ims application-manager { domain-name domain-name | ipv4-address ipv4_address }
no
Disables the IMS application manager for this subscriber.
ims application-manager
Enables the IMS application manager for this subscriber.
domain-name
domain-name
Specifies the domain name of the application manager.
domain-name
must be an alphanumeric string of 1 through 63 characters.
ipv4-address ipv4_address
Specifies the IP address of the application manager using IPv4 dotted-decimal notation.
Usage
The IMS application manager address is returned by HA to MN in DHCP Ack when it receives the DHCP
inform from an AIMS subscriber.
inform from an AIMS subscriber.
Example
ims application-manager domain-name domain23ims application-manager ipv4-
address 192.168.23.1
address 192.168.23.1