Cisco Cisco Packet Data Gateway (PDG)
Credit Control Configuration Mode Commands
▀ diameter msg-type
▄ Command Line Interface Reference, StarOS Release 17
2804
Usage
With this CLI command “
diameter msg-type ccrt suppress-final-reporting
” configured:
Before MSCC enters into FUI Redirect or Restrict-Access state, all the used quota is reported using the
Reporting-Reason as “OTHER_QUOTA_TYPE”. Since all the quota is reported, there is no need to send any
other FINAL reporting to OCS.
Releases prior to 16.0, even if there is no quota utilization, the gateway sends FINAL with USU as ‘0’ octets
in CCR-T. In this release, the FINAL reporting in CCR message is controlled when there is no quota usage to
report to the OCS server during the FUI Redirect/Restrict-access scenario.
With this CLI command “
Reporting-Reason as “OTHER_QUOTA_TYPE”. Since all the quota is reported, there is no need to send any
other FINAL reporting to OCS.
Releases prior to 16.0, even if there is no quota utilization, the gateway sends FINAL with USU as ‘0’ octets
in CCR-T. In this release, the FINAL reporting in CCR message is controlled when there is no quota usage to
report to the OCS server during the FUI Redirect/Restrict-access scenario.
With this CLI command “
diameter msg-type ccru suppress-final-reporting
” configured:
In releases prior to 15.0, CCR-U is sent immediately on receiving 4010 or 4012 Result-Code at MSCC level.
This new CLI command controls sending of immediate CCR-U with FINAL as Reporting-Reason. All other
behaviors remain almost same like a Rating-group being blacklisted.
If this CLI command is configured, on receiving the result-code 4010/4012 at MSCC-level, immediate CCR-
U with FINAL as Reporting-Reason will not be sent. All USU corresponding to that rating group is reported
in CCR-T message.
This new CLI command controls sending of immediate CCR-U with FINAL as Reporting-Reason. All other
behaviors remain almost same like a Rating-group being blacklisted.
If this CLI command is configured, on receiving the result-code 4010/4012 at MSCC-level, immediate CCR-
U with FINAL as Reporting-Reason will not be sent. All USU corresponding to that rating group is reported
in CCR-T message.
Example
The following command specifies not to send FINAL reporting for FUA Redirect/Restrict-access:
diameter msg-type ccrt suppress-final-reporting