Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (H-L)
show ip bgp ▀
Command Line Interface Reference, StarOS Release 17 ▄
4629
vrf
vrf_name
[
ipv4_address/mask
| neighbors | summary ]
: Displays information about
the VRF. Where
vrf_name
: Specifies the name of the VRF as an alphanumeric string of 1 through 63
characters.
ip_address/mask
: Specifies an IP address in IPv4 dotted-decimal CIDR notation.
neighbors
: Displays neighbor information for the all the VRFs including the default VRF or
for the VRF with a matching RD value.
summary
: Displays summary information of neighbors for all the VRFs including the default
VRF or for the VRF with a matching RD value.
| { grep
grep_options
|
more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command display to BGP information for the current context.
Example
The following command displays information for all BGP neighbors:
show ip bgp neighbors