Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (D-S)
▀ debug ip ospf ism
▄ Command Line Interface Reference, StarOS Release 16
3934
debug ip ospf ism
Enables or disables OSPF Interface State Machine (ISM) troubleshooting, based on ISM information type. If no
keywords are specified all ISM information types are enabled. If logging is enabled, results are sent to the logging
system.
keywords are specified all ISM information types are enabled. If logging is enabled, results are sent to the logging
system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] debug ip ospf ism [ events | status | timers ]
no
Disables debugging the specified ISM information. If no keywords are specified, all information is disabled.
events
Enables debugging ISM event information.
status
Enables debugging ISM status information.
timers
Enables debugging ISM timer information.
Usage
Use this command to output ISM debug information.
Example
To enable all ISM debug information, enter the following command;
debug ip ospf ism
To disable all ISM debug information, enter the following command;
no debug ip ospf ism