Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (D-S)
sgtpc test echo sgsn-address ▀
Command Line Interface Reference, StarOS Release 16 ▄
4109
sgtpc test echo sgsn-address
Initiates SGTPC echo test procedure.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
sgtpc test echo sgsn-address sgsn_ip_address { all | ggsn-address ggsn_ip_address }
sgsn-address sgsn_ip_address
Identifies the IP address of the SGSN issuing the test in IPv4 dotted-decimal notation.
all
Sends GTPC echo requests to all GGSNs having current sessions with the SGTP service.
ggsn-address
ggsn_ip_address
Sends a GTPC echo request to the specified GGSN whether or not the GGSN has active sessions with the
SGTP service.
SGTP service.
ggsn_ip_address
is entered using IPv4 dotted-decimal notation.
Usage
This command initiates a test for the GTPC echo procedure -- echo from the specified SGSN to a specified
GGSN or to all GGSNs that have sessions with the SGTP service. Issue the command from the Exec Mode
within the context in which the SGTP service is configured.
Note that if the GGSN does not respond to the initial echo request, the echo requests will be retried for the
max-retransmissions times.
GGSN or to all GGSNs that have sessions with the SGTP service. Issue the command from the Exec Mode
within the context in which the SGTP service is configured.
Note that if the GGSN does not respond to the initial echo request, the echo requests will be retried for the
max-retransmissions times.
Example
This SGSN with IP address of
10.1.1.1
sends an echo test to all GGSNs attached to the SGTP service:
sgtpc test echo sgsn-address 10.1.1.1 all