Cisco Cisco Packet Data Gateway (PDG) 产品宣传页
Exec Mode show Commands (D-G)
▀ show gtpu
▄ Cisco ASR 5x00 Command Line Interface Reference
4374
mseg-service mseg_service_name
Important:
This keyword is not supported in this release.
peer-address ipv4/ipv6_address
Displays GTP-U statistics and counters for an existing peer IP address specified in IPv4 dotted-decimal or
IPv6 colon-separated-hexadecimal notation.
IPv6 colon-separated-hexadecimal notation.
| { grep grep_options | more }
Pipes (sends) the output of this command to a specified command. You must specify a command to which the
output of this command will be sent.
For details on the usage of the
output of this command will be sent.
For details on the usage of the
grep
and
more
commands, refer to the Regulating a Command’s Output
section of the Command Line Interface Reference Guide.
Usage
Use this command to view statistics and counters for GTP-U traffic on this system. Refine the statistics
display by including a filter with the command.
display by including a filter with the command.
Important:
The
show gtpu statistics
command should be given from the local context only; issuing the
command from any other context will result in an error message.
Example
The following command displays statistics for the GTP-U service named
gtp1
:
show gtpu statistics gtpu-service gtp1
The following command displays active sessions on all local-addresses categorisied by GTPU service:
show gtpu local-addresses
The following command displays statistics for local GTPU address
168.123.123.1
:
show gtpu statistics local-address 168.123.123.1