Cisco Cisco Packet Data Interworking Function (PDIF) 产品宣传页
Global Configuration Mode Commands (T-threshold phspc)
▀ threshold edr-udr-dropped flow control
▄ Cisco ASR 5x00 Command Line Interface Reference
5366
threshold edr-udr-dropped flow control
Configures alarm or alert thresholds to monitor the total number of Event Data Records (EDRs) and Usage Data
Records (UDRs) discarded due to flow control.
Records (UDRs) discarded due to flow control.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold edr-udr-dropped-flow-control high_thresh [ clear low_thresh ]
default threshold edr-udr-dropped-flow-control
default
Configures this command with the default threshold settings.
Default: High threshold: 90; Low threshold: 10
Default: High threshold: 90; Low threshold: 10
high_thresh
Specifies the high threshold for total number of EDRs + UDRs dropped due to flow control, which must be
met or exceeded within the polling interval to generate an alert or alarm.
met or exceeded within the polling interval to generate an alert or alarm.
high_thresh
must be an integer from 0 through 100000.
A value of 0 disables the threshold.
Default: 90
Default: 90
clear
low_thresh
Specifies the low threshold for total number of EDRs + UDRs dropped that maintains a previously generated
alarm condition. If the total number of EDRs + UDRs dropped falls below Specifies the low threshold within
the polling interval, a clear alarm is generated.
alarm condition. If the total number of EDRs + UDRs dropped falls below Specifies the low threshold within
the polling interval, a clear alarm is generated.
low_thresh
must be an integer from 0 through 100000 that must be lower than
high_thresh
.
A value of 0 disables the threshold.
Default: 10
Default: 10
Usage
Use this command to configure thresholds to monitor the total number of EDRs + UDRs discarded due to
flow control. Alerts or alarms are generated based on the total number of EDRs + UDRs dropped during
polling interval.
Alerts or alarms are triggered for EDR file space usage session based on the following rules:
flow control. Alerts or alarms are generated based on the total number of EDRs + UDRs dropped during
polling interval.
Alerts or alarms are triggered for EDR file space usage session based on the following rules: