Cisco Cisco Packet Data Interworking Function (PDIF) 产品宣传页
IMEI Profile Configuration Mode
pdp-activate ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6219
pdp-activate
This command enables the operator to configure the SGSN to reject Secondary PDPActivation Requests from the UE
based on IMEI range.
based on IMEI range.
Product
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > IMEI Profile Configuration
configure > imei-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-imei-profile-profile_name)#
Syntax
[ remove ] pdp-activate { drop | restrict } secondary-activation� access-type { gprs |
umts }
umts }
remove
Removes the configured value and returns the pdp-activate configuration to the default ‘not configured’ state.
drop
This keyword causes the GSN to ignore the Request.
restrict
This keyword instructs the SGSN to reject Secondary PDP Activation Requests.
access-type { gprs | umts }
This keyword instructs the SGSN to ignore or reject Secondary PDP Activation Requests on the basis of the
UE’s access network type:
UE’s access network type:
gprs
: from a 2G network.
umts
: from a 3G network.
Usage
The SGSN administrator can use this command to configure the IMEI profile in the operator policy to either
ignore or reject Secondary PDP Activation Requests from UEs based on an IMEI range and UE access-type.
Restricting secondary PDP activation based on the IMEI (in the IMEI profile) takes precedence over
secondary PDP activation that might be configured in the call control profile.
ignore or reject Secondary PDP Activation Requests from UEs based on an IMEI range and UE access-type.
Restricting secondary PDP activation based on the IMEI (in the IMEI profile) takes precedence over
secondary PDP activation that might be configured in the call control profile.
Example
Enable rejection of Secondary PDP Activation Requests for 2G callers:
pdp-activate restrict secondary-activation access-type gprs