Cisco Cisco Aironet 350 Wireless LAN Client Adapter 發佈版本通知
5
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.3 for Windows
OL-5515-01
Important Notes
Inserting and Removing Client Adapters
The following rules apply when inserting and removing client adapters:
•
If you start ACU while a client adapter of one radio type is inserted (such as a 350 series PC card)
and then eject the card and replace it with a card of another radio type (such as a CB20A PC-Cardbus
card), ACU displays "Your Wireless LAN Adapter is not inserted" until ACU is shut down and
restarted.
and then eject the card and replace it with a card of another radio type (such as a CB20A PC-Cardbus
card), ACU displays "Your Wireless LAN Adapter is not inserted" until ACU is shut down and
restarted.
•
The profiles for PC-Cardbus cards are tied to the slot in which the card is inserted. Therefore, you
must always insert your PC-Cardbus card into the same slot, create profiles for both slots, or export
the profiles for one slot and import them for the other slot.
must always insert your PC-Cardbus card into the same slot, create profiles for both slots, or export
the profiles for one slot and import them for the other slot.
New EAP-SIM Supplicant Available
A new EAP-SIM supplicant is available for download from Cisco.com. This new supplicant is an
upgrade to the one included in the Install Wizard file. It provides new features, supports more recent
versions of the EAP-SIM draft standard, and can be used with standard GSM-SIM cards as well as
Gemplus SIM+ smartcards.
upgrade to the one included in the Install Wizard file. It provides new features, supports more recent
versions of the EAP-SIM draft standard, and can be used with standard GSM-SIM cards as well as
Gemplus SIM+ smartcards.
The new supplicant overwrites any previous EAP-SIM supplicant settings. If you plan to install the Cisco
Aironet Install Wizard file after the new supplicant is installed, either perform an express installation or
make sure the EAP-SIM option is not selected on the Custom Installation screen. Otherwise, the
EAP-SIM supplicant included in the Install Wizard file overwrites the new supplicant’s settings.
Aironet Install Wizard file after the new supplicant is installed, either perform an express installation or
make sure the EAP-SIM option is not selected on the Custom Installation screen. Otherwise, the
EAP-SIM supplicant included in the Install Wizard file overwrites the new supplicant’s settings.
You can access the latest EAP-SIM supplicant at the following URL:
Windows Wireless Network Connection Icon Shows Unavailable Connection
(Windows XP Only)
(Windows XP Only)
If your computer is running Windows XP and you configured your client adapter using ACU, the
Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X
and show an unavailable connection even though a wireless connection exists. This condition is caused
by a conflict between ACU and Windows XP’s wireless network settings. Simply ignore the Windows
icon and use the ACM icon to check the status of your client adapter’s wireless connection.
Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X
and show an unavailable connection even though a wireless connection exists. This condition is caused
by a conflict between ACU and Windows XP’s wireless network settings. Simply ignore the Windows
icon and use the ACM icon to check the status of your client adapter’s wireless connection.
Cisco Aironet Software Requires Completion of Encryption Authorization Form
In order to access Cisco Aironet software from the Software Center on Cisco.com, you must fill out a
form to receive authorization to download encrypted software. Registered Cisco.com users are required
to fill out the form only once, but public users must do so once each session, each time software is
downloaded. A form is automatically created for public users. The form for registered Cisco.com users
is at the following URL:
form to receive authorization to download encrypted software. Registered Cisco.com users are required
to fill out the form only once, but public users must do so once each session, each time software is
downloaded. A form is automatically created for public users. The form for registered Cisco.com users
is at the following URL: