Cisco Cisco Aironet 350 Wireless LAN Client Adapter 發佈版本通知
10
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 4.5
OL-19057-02
Installing the Client Adapter Software
Caution
Do not eject your client adapter at any time during the installation process, including during the reboot.
Note
This procedure is meant to be used the first time the Cisco Aironet CB21AG or PI21AG client adapter
software is installed on your computer. If this software is already installed on your computer, follow the
instructions in the “Routine Procedures” chapter of the Cisco Aironet 802.11a/b/g Wireless LAN Client
Adapters (CB21AG and PI21AG) Installation and Configuration Guide to upgrade the client adapter
software.
software is installed on your computer. If this software is already installed on your computer, follow the
instructions in the “Routine Procedures” chapter of the Cisco Aironet 802.11a/b/g Wireless LAN Client
Adapters (CB21AG and PI21AG) Installation and Configuration Guide to upgrade the client adapter
software.
Note
Only one CB21AG or PI21AG client adapter can be installed and used at a time. The software does not
support the use of multiple CB21AG or PI21AG cards.
support the use of multiple CB21AG or PI21AG cards.
Step 1
Ensure that the client adapter is inserted into your computer.
Step 2
Ensure that you have a Cisco Connection Online (CCO) username and password.
Step 3
If you do not have a CCO username and password, go to Cisco’s main page (
) and
click Register (top). Then, follow the instructions to create a CCO username and password.
Step 4
Browse to the following location:
Step 5
Click Wireless Software.
Step 6
Click Wireless LAN Access.
Step 7
Click Cisco Wireless LAN Client Adapters.
Step 8
Click Cisco Aironet Wireless LAN Client Adapters.
Step 9
Perform one of the following steps:
•
If you are using a PC-Cardbus card, click Cisco Aironet 802.11a/b/g CardBus Wireless LAN
Client Adapter (CB21AG).
Client Adapter (CB21AG).
•
If you are using a PCI card, click Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter
(PI21AG).
(PI21AG).
Step 10
When prompted, enter your CCO username and password, and click OK.
Step 11
Click Aironet Client Installation Wizard (Firmware, Driver, Utility).
Step 12
Click Windows 2000 or Windows XP.
Step 13
Click the link with the latest release number.
Step 14
Click the Install Wizard file (WinClient-802.11a-b-g-Ins-Wizard-vxx.exe, where xx is the version
number).
number).
Step 15
If prompted, enter your CCO username and password, and click OK.
Step 16
Complete the encryption authorization form, read and accept the terms and conditions of the Software
License Agreement, select the file again to download it, and save the file on your computer’s Desktop.
License Agreement, select the file again to download it, and save the file on your computer’s Desktop.
Step 17
Use Windows Explorer to find the installer.
Step 18
Double-click the installer. The “Starting InstallShield Wizard” message appears followed by the
Preparing Setup window (see
Preparing Setup window (see
) and the Cisco Aironet Installation Program window (see
).