Cisco Cisco WAP2000 Wireless-G Access Point - PoE 發佈版本通知
Release Notes for Cisco WAP2000 Wireless-G Access Point with PoE Firmware Version 2.0.6.0
3
Release Notes
•
GUI—The verification of the listed items with NTP Server IP, SNMP Trusted
Host, SNMP Trap-Destination, and Syslog Server IP address(es):
Host, SNMP Trap-Destination, and Syslog Server IP address(es):
-
Allow leading zeros.
-
Modify the error message “Invalid value for IP address! Please, specify a
value between 1 and 223” because this message for the host IP input is
not clear. The system is actually verifying the first IP address is between
1 and 223.
value between 1 and 223” because this message for the host IP input is
not clear. The system is actually verifying the first IP address is between
1 and 223.
-
The fourth IP address rule does not allow 0 and 255 to ensure the host
assignment.
assignment.
•
Administration—DHCP Auto Configuration: Backup TFTP server with IP
address option accepts non-ucast IP address range (the first octet is
outside of 1-223).
address option accepts non-ucast IP address range (the first octet is
outside of 1-223).
•
Setup > Basic Setup—Static IP Address cannot block 0 and 255 in the first
value of the DNS IP Address.
value of the DNS IP Address.
•
Wireless > Basic Settings—Limit SSID length to 31 characters.
•
Wireless > Security—The fourth RADIUS Server IP address can accept
0 and 255.
0 and 255.
•
Wireless > Basic Settings—Modify alert message when SSID includes a
blank character.
blank character.
•
Wireless > SSID—When adding SSID 3 or 4 and then clicking Cancel,
SSID 3 and 4 display Enabled SSID Broadcast.
SSID 3 and 4 display Enabled SSID Broadcast.
•
Wireless > Security—The RADIUS Server port can accept 99999.
•
VLAN—DUT can accept 4095 as a VLAN ID.
•
VLAN—GUI can accept leading zero number(s) followed by other
number(s) as the VLAN ID.
number(s) as the VLAN ID.
•
AP Mode—The Site Survey buttons of the access point include too many
spaces within the box field on the Safari browser.
spaces within the box field on the Safari browser.
•
Administration: SNMP Help—The SNMP Help information has some errors.
•
Administration: Spanning Tree Protocol (STP) Setup is included in the
Basic Setup page.
Basic Setup page.