Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 發佈版本通知
Release Notes for the Cisco WAP121 and WAP321 Wireless Access Points
7
Release Notes
•
CSCtw87635
•
CSCtw70914
•
CSCtw62382
•
CSCtw47624
•
CSCts99306
Open Caveats
Table 3 Open Caveats in Firmware Version 1.0.1.10
Ref Number
Description
CSCub46649
Symptom:
While operating WDS Bridging using a 2.4 GHz band with a 20/40 MHz
channel bandwidth, the WDS links may disconnect. The radio can change from 40 MHz
to 20 MHz if any 20 MHz devices are detected in the area, resulting in a mismatch of
channel bandwidths throughout the WDS devices.
to 20 MHz if any 20 MHz devices are detected in the area, resulting in a mismatch of
channel bandwidths throughout the WDS devices.
Workaround:
Configure WDS links using the 20 MHz channel bandwidth.
CSCub46043
Symptom:
When untagged packets are received on a VAP interface (SSID), they may
be treated as tagged packets.
CSCub45975
Symptom:
In a radio saturated environment, Work Group Bridge mode can take from
three to seven minutes to establish connectivity with the remote upstream access point.
CSCtx68659
Symptom:
Bonjour does not operate at the very first bootup of the WAP321 device.
Even though the Bonjour feature shows enabled on the web-based configuration utility,
Bonjour- enabled browsers or Cisco FindIT cannot access the WAP321 device.
Bonjour- enabled browsers or Cisco FindIT cannot access the WAP321 device.
Workaround:
Manually reset the WAP321 by pressing the Reset button on the
device. Once the device is rebooted, the Bonjour name can be accessed by Bonjour-
enabled browsers or Cisco FindIT.
enabled browsers or Cisco FindIT.
CSCtx04467
Symptom:
When DHCP connectivity is changed to a static IP address, the browser
does not automatically redirect the web-based configuration utility to the new IP
address.
address.
Workaround:
Type in the new static IP address into the URL field and login again.