Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 维护手册
SNMP
Groups
Cisco WAP131 and WAP351 Administration Guide
152
9
STEP 4
Configure these parameters:
•
Group Name—Enter the name that identifies the group. The default group
names are RO and RW. Group names can contain up to 32 alphanumeric
characters.
names are RO and RW. Group names can contain up to 32 alphanumeric
characters.
•
Security Level—Sets the security level for the group, which can be one of
these options:
these options:
-
noAuthNoPriv—No authentication and no data encryption (no security).
-
authNoPriv—Authentication, but no data encryption. With this security
level, users send SNMP messages that use an SHA key or password for
authentication, but not a DES key or password for encryption.
level, users send SNMP messages that use an SHA key or password for
authentication, but not a DES key or password for encryption.
-
authPriv—Authentication and data encryption. With this security level,
users send an SHA key or password for authentication and a DES key or
password for encryption. For groups that require authentication,
encryption, or both, you must define the SHA and DES keys or passwords
on the SNMP Users page.
users send an SHA key or password for authentication and a DES key or
password for encryption. For groups that require authentication,
encryption, or both, you must define the SHA and DES keys or passwords
on the SNMP Users page.
•
Write Views—Choose the write access to MIBs for the group, which can be
one of these options:
one of these options:
-
view-all—The group can create, alter, and delete MIBs.
-
view-none—The group cannot create, alter, or delete MIBs.
•
Read Views—Choose the read access to MIBs for the group, which can be
one of these options:
one of these options:
-
view-all—The group is allowed to view and read all MIBs.
-
view-none—The group cannot view or read MIBs.
STEP 5
Click Save. The group is added to the SNMPv3 Groups list and your changes are
saved to the Startup Configuration.
saved to the Startup Configuration.
NOTE
To remove a group, check the group in the list and click Delete.