Cisco Cisco Aironet 1600i Access Point
-xx
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
Purpose
– Enable and disable the radios
– Manually set basic and supported transmission rates
– Enable advertised cell power in beacons to client, to enable DTPC for doing active surveys
– Enable and disable SSID broadcast in beacons
– Enable open authentication
Purpose
This guide provides the information you need to install and configure your access point. This guide
provides procedures for using the Cisco IOS software commands that have been created or changed for
use with the access point. It does not provide detailed information about these commands. For detailed
information about these commands, refer to the Cisco IOS Command Reference for Cisco Aironet Access
Points and Bridges for this release. For information about the standard Cisco IOS software commands,
refer to the Cisco IOS software documentation set available from the Cisco.com home page at Support
> Documentation.
provides procedures for using the Cisco IOS software commands that have been created or changed for
use with the access point. It does not provide detailed information about these commands. For detailed
information about these commands, refer to the Cisco IOS Command Reference for Cisco Aironet Access
Points and Bridges for this release. For information about the standard Cisco IOS software commands,
refer to the Cisco IOS software documentation set available from the Cisco.com home page at Support
> Documentation.
This guide also includes an overview of the access point web-based interface (APWI), which contains
all the functionality of the command-line interface (CLI). This guide does not provide field-level
descriptions of the APWI windows nor does it provide the procedures for configuring the access point
from the APWI. For all APWI window descriptions and procedures, refer to the access point online help,
which is available from the Help buttons on the APWI pages.
all the functionality of the command-line interface (CLI). This guide does not provide field-level
descriptions of the APWI windows nor does it provide the procedures for configuring the access point
from the APWI. For all APWI window descriptions and procedures, refer to the access point online help,
which is available from the Help buttons on the APWI pages.
Configuration Procedures and Examples
The procedures and examples given in this guide have been documented as seen on the Cisco Aironet
3600 Series Access Points.
3600 Series Access Points.
To view the latest configuration examples, visit Cisco Tech Zone(
https://techzone.cisco.com
). In the
Tech Zone Navigator, browse to Wireless LAN > Autonomous APs (IOS) - Knowledge base for
Autonomous (IOS) Wireless Deployments.
Autonomous (IOS) Wireless Deployments.
Note
You need to have an account on Cisco.com to access Cisco Tech Zone. If you do not have an account,
you can create one by clicking Register Now on the Log In page.
you can create one by clicking Register Now on the Log In page.
Organization
This guide is organized into these chapters:
lists the software and hardware features of the access
point and describes the access point role in your network.
describes how to use the web-browser interface to
configure the access point.
describes how to use the command-line interface (CLI)
to configure the access point.
describes how to configure basic settings
on a new access point.